Celulose microcristalina como reforço em filmes de amido/poli (adipato-co-tereftalato de butileno)
| dataload.collectionmapped | 02 - Mestrado - Ciência de Alimentos | pt_BR |
| dataload.filenamenourau | 3799.pdf | pt_BR |
| dataload.handlemapped | 123456789/7 | pt_BR |
| dataload.idpergamum | 148643 | pt_BR |
| dataload.idvirtuanourau | vtls000183678 | pt_BR |
| dataload.idvirtuapergamum | vtls000183678 | pt_BR |
| dataload.idvirtuapergamum.sameurlnourau | SIM | pt_BR |
| dataload.linknourau | http://www.bibliotecadigital.uel.br/document/?code=vtls000183678 | pt_BR |
| dataload.linknourau.regular | SIM | pt_BR |
| dataload.linknourau.retificado | http://www.bibliotecadigital.uel.br/document/?code=vtls000183678 | pt_BR |
| dataload.linknourau.size | 64.00 | pt_BR |
| dc.contributor.advisor | Grossmann, Maria Victória Eiras [Orientador] | pt_BR |
| dc.contributor.author | Reis, Mônica Oliveira | pt_BR |
| dc.contributor.banca | Sakanaka, Lyssa Setsuko | pt_BR |
| dc.contributor.banca | Oliveira, Suzana Mali de | pt_BR |
| dc.coverage.spatial | Londrina | pt_BR |
| dc.date.accessioned | 2024-05-01T14:03:12Z | |
| dc.date.available | 2024-05-01T14:03:12Z | |
| dc.date.created | 2013.00 | pt_BR |
| dc.date.defesa | 10.04.2013 | pt_BR |
| dc.description.abstract | Resumo: A mistura de amido termoplástico com poliésteres biodegradáveis é uma alternativa para melhorar as propriedades mecânicas e de barreira dos filmes de amido. Fibras celulósicas também podem ser empregadas em matrizes poliméricas, pois poderão melhorar as propriedades mecânicas dos filmes, devido a sua alta resistência e rigidez. Este trabalho abordou a elaboração e caracterização de filmes biodegradáveis de amido/PBAT (poli (adipato-co-tereftalato de butileno)) com a incorporação de diferentes concentrações de celulose microcristalina (MCC) como reforço. Glicerol foi usado como plastificante. Os filmes foram produzidos por extrusão-balão, empregando extrusora dupla rosca, na fase de peletização, e mono rosca, na de formação. Os filmes foram caracterizados quanto a algumas características físicas, propriedades mecânicas, térmicas, microestruturais e permeabilidade ao vapor de água (PVA). Foram realizados quatro experimentos. No primeiro, incorporou-se 1, 3 e 5% de MCC em blendas de amido/PBAT (50:50). A resistência à tração e a PVA dos filmes com e sem MCC não apresentaram diferenças significativas, no entanto, a perda de peso em água e a densidade dos filmes com MCC aumentaram em comparação com o CONTROLE (C). Não foram observadas diferenças nos espectros e na cristalinidade dos filmes C (sem MCC) e MCC3 (3% de MCC), entretanto, a concentração de 3% de MCC alterou ligeiramente a estrutura dos filmes e aumentou o módulo de armazenamento. No segundo experimento, avaliou-se a influência de outras concentrações de MCC (4, 7 e 10%), sendo duas delas maiores que as estudadas anteriormente. Com o aumento do teor de fibra (7 e 10%) ocorreu uma diminuição na resistência à tração, alongamento na ruptura e perda de peso, porém, a PVA e a densidade não apresentaram diferenças entre os filmes. A microestrutura foi alterada, mostrando que a MCC formou aglomerados (principalmente com a adição de 10% de MCC), o que explicaria as pobres propriedades mecânicas. O terceiro experimento consistiu em modificar a proporção entre amido e PBAT de 50:50 para 60:40 e manter as concentrações de MCC do primeiro experimento. Ao aumentar a concentração de amido, a resistência à tração e o alongamento na ruptura diminuíram e a PVA e perda de peso em água, aumentaram, quando comparadas com as dos outros experimentos, devido ao caráter hidrofilico do amido. Portanto, o aumento no teor de amido não contribuiu para que a MCC exercesse efeito de reforço. No ultimo experimento, foram utilizadas as mesmas formulações do primeiro experimento e ácido cítrico (AC) (0,75%) como compatibilizante. A presença de AC alterou muito pouco as propriedades dos filmes de amido/PBAT/MCC. Quando foram utilizadas diferentes UR na análise de propriedades mecânicas, houve diferenças significativas nas propriedades dos filmes, devido à ação plastificante da água e, a presença de MCC, afetou as propriedades dos filmes apenas em 33% de UR. Em comparação com o primeiro experimento, os filmes com AC apresentaram maior cristalinidade. De um modo geral, a inclusão de MCC não melhorou as características dos filmes de amido/PBAT, indicando a necessidade de mais estudos para viabilizar seu emprego como reforço em filmes produzidos por extrusão | |
| dc.description.abstractother1 | Abstract: The mixture of thermoplastic starch with biodegradable polyesters is an alternative to improve the mechanical and barrier properties of starch films. Cellulosic fibers are also used in polymeric matrices because they can improve the mechanical Properties of the films, due to their high strength and stiffness. This work aimed the development and characterization of biodegradable films of starch/PBAT (poly (butylene adipate co-terephthalate)) with the addition of different concentrations of microcrystalline cellulose (MCC) as reinforcement. Glycerol was used as plasticizer. The films were produced by blown extrusion, using a twin screw extruder in the pelleting step and a single screw extruder for the film formation. The films were characterized according to the physical characteristics, mechanical, thermal, microstructural properties and water vapor permeability (WVP). Four experiments were performed. In the first one, 1, 3 and 5% of MCC were incorporated in blends of starch/PBAT (50:50). The tensile strength and WVP of the films with and without MCC showed no significant differences. However, the weight loss in water and density of the films with MCC increased compared with the control (C). No differences were observed in the XRay spectra and in the crystallinity of the films C (without MCC) and MCC3 (3% MCC), but the concentration of 3% MCC slightly modified the structure and increased the storage modulus of the films.. The second experiment was performed to evaluate the influence of other concentrations of MCC (4, 7 and 10%), two of which are larger than those previously studied. With increasing fiber content (7 and 10%) there was a decrease in tensile strength, elongation at break and weight loss, while the WVP and density did not differ between the films. The microstructure was altered, showing that the MCC formed agglomerates (especially with the addition of 10% MCC), which would explain the poor mechanical properties. The third experiment was consisted of modifying the ratio of starch and PBAT from 50:50 to 60:40 maintaining the MCC's concentrations of the first experiment. By increasing starch concentration, the tensile strength and elongation at break decreased and WVP and weight loss in water increased, compared to the other experiments, due to the hydrophilic character of starch. Therefore, the increase in starch content did not contribute to the reinforcing effect of the MCC. In the last experiment, the same formulations of the first one were performed by including citric acid (CA) (0.75%) as compatibilizer. The presence of CA has changed very little the properties of starch/PBAT/MCC films. When diferente RH were used in the mechanical properties analysis, significant differences in the properties of the films were observed, due to the plasticizing action of water. The MCC affected properties only in 33% RH. Compared with the first experiment, the films with CA showed higher crystallinity. Generally, the inclusion of MCC did not improve the characteristics of the starch/PBAT films, indicating the need of further studies to enable its use as reinforcement in films produced by extrusion | |
| dc.description.notes | Dissertação (Mestrado em Ciência de Alimentos) - Universidade Estadual de Londrina, Centro de Ciências Agrárias, Programa de Pós-Graduação em Ciência de Alimentos | pt_BR |
| dc.identifier.uri | https://repositorio.uel.br/handle/123456789/12855 | |
| dc.language | por | |
| dc.relation.coursedegree | Mestrado | pt_BR |
| dc.relation.coursename | Ciência de Alimentos | pt_BR |
| dc.relation.departament | Centro de Ciências Agrárias | pt_BR |
| dc.relation.ppgname | Programa de Pós-Graduação em Ciência de Alimentos | pt_BR |
| dc.subject | Alimentos | pt_BR |
| dc.subject | Embalagens | pt_BR |
| dc.subject | Filmes biodegradáveis | pt_BR |
| dc.subject | Propriedades mecânicas | pt_BR |
| dc.subject | Embalagens | pt_BR |
| dc.subject | Packaging | pt_BR |
| dc.subject | Mechanical properties | pt_BR |
| dc.subject | Citric acid | pt_BR |
| dc.subject | Polymers | pt_BR |
| dc.subject | Packaging - Food | pt_BR |
| dc.subject | Biodegradable films | pt_BR |
| dc.title | Celulose microcristalina como reforço em filmes de amido/poli (adipato-co-tereftalato de butileno) | pt_BR |
| dc.type | Dissertação | pt_BR |
Arquivos
Pacote Original
1 - 2 de 2
Carregando...
- Nome:
- CA_ALI_Me_2015_Reis_Mônica_O.pdf
- Tamanho:
- 3.21 MB
- Formato:
- Adobe Portable Document Format
- Descrição:
- Texto completo ID. 148643
Nenhuma Miniatura disponível
- Nome:
- CA_ALI_Me_2015_Reis_Mônica_O_Termo.pdf
- Tamanho:
- 87.85 KB
- Formato:
- Adobe Portable Document Format
- Descrição:
- Termo de autorização